Air cooled liquid chiller. Nominal cooling capacity 1.8 - 4.4 kW

Thanks to the non-ferrous hydraulic circuit, the Oris chillers are also able to work with process fluids that are aggressive towards carbon steel, maintaining maximum cleanliness and quality.

Installable anywhere

Thanks to their compactness, the Oris units can also be easily positioned under a workbench. The robust design with eyebolts allows the unit to be lifted by means of hook-and-loop straps. Thanks to the bi-frequency design, the M03 is ready for 50Hz and 60Hz applications.

Easy maintenance

The organic layout of the components, the simplicity of the refrigeration circuit and the numbering of the electrical system cables simplify inspection and maintenance operations, which can also be carried out with the unit running. Disassembly of the condenser air filters for periodic cleaning operations is facilitated thanks to a simple snap-fit system. The MINI 08-10 models are equipped with a steady green light in normal operating conditions and a red light in alarm conditions.

Extended operating limits

Extended operating limits allow Oris units to operate even in the most extreme conditions. The maximum water inlet and minimum outlet temperatures are +35 °C and 0 °C respectively. Oris can operate in ambient temperatures up to 45 °C.

Benefits:

Innovative finned coil evaporator immersed in the hydraulic tank, characterised by low pressure drops and reduced susceptibility to fouling;

Refrigerants R134a (mod. M03) and R410A (mod. M05-10) which, thanks to their improved heat exchange properties, enable excellent performance;

Reinforced structure that can be moved using lifting eyebolts;

Standard NON FERROUS atmospheric hydraulic circuit;

Atmospheric hydraulic storage tank made of polyethylene equipped with visual level indicator, filling cap, drain connections and overflow;

Hydraulic safety by-pass;

XR60CX advanced microprocessor control standard on all models;

Dry contact general alarm and digital input for remote ON/OFF;

Easy installation, operation and maintenance;

SEPR HT Tier2 compliant.

Options:

Fine temperature control version (mod. M08-M10): process water outlet temperature is precisely controlled (hysteresis ± 0.5 °C) by means of a hot gas injection solenoid valve, controlled by PID logic;

Version for low water outlet temperature Tw out min = -5 °C;

P5 pump (mod. M08-M10): non-ferrous peripheral pump with a usable head of approx. 5 barg;

Water level sensor (mod. M08-M10);

Industrial multipole connector (mod. M08-M10);

Hydraulic disconnection system (mod. M08-M10);

Stainless steel carpentry.

Kits:

Water filter kit;

External automatic water by-pass kit;

Anti-vibration kit;

Dynamic set point kit;

Wheel kit.